Products

S-5

S-5

Active road studs with 5x5 LED lights, mounted in a cast iron housing, which is snow plough-resistant and long-lasting with removable reflective element, installed at active crosswalks in tunnels or dangerous sections of streets in towns.
  • Active
  • LED (5+5) or (10+10)
  • Work time: 380 h
  • Diameter: 180 mm
  • Weight: 4,5 kg

Product functions

High cast iron cover resistance against wear by abrasion and ploughs

High reflector resistance against wear by abrasion caused by tires

Self cleaning system activated during rainfall.

Gentle ramp for the wheels of vehicles as well as road maintenance machines (for instance ploughs) which guarantees trouble-free driving

“Alert” system acting as acoustic warning when crossing the road marking line

System which enables programming a length of LED light

Detachable cover to replace electronic inserts with LED and battery

Product advantages

The main advantages of S–5 are:

  • High visibility of the reflector up to 1000 m
  • Low maintenance costs of labelling dangerous spots on roads
  • Energy saving system allows full time working LED system
  • Energy-saving system capable of operating LED lights up to 380 hours on a single battery charge
  • Possibility of flexible programming of the length of light and the power of LED light
  • Possibility of installing two-color LEDs
  • Possibility to connect the S-5 to the night or motion sensor
  • it can be used in the places where is impossible to use photovoltanic panel
  • Cable power system allows aplication S-5 in places, where the charging of accumulator by photovoltaic panel is impossible

Solutions

S-5 is recommended for the marking of highly dangerous main roads and motorways:

  • Dangerous sections of streets in towns where a lot of accidents happen
  • Low speed bumps ahead of crossroads
  • Tunnels
  • Bridges
  • Active  pedestrian crossings

Product name S-5
Type of product Plough-resistant. High mechanical impact resistance.
Technical specification – Reflector and light-emitting diode
Type of reflector LED light
Number of LEDs 5 to 10at the front + 5 to 10 at the back
LED light visibility up to 1000 m
LED beam horizontal angle max 60⁰ (optionally 15⁰, 30⁰ and 40⁰)
Photovoltaic Panel (PV) —–
PV lifespan —–
SAAL system activation —–
Type of battery permament source
Charging time no charging time
Operation time non-stop
Temperature resistance From –35⁰C up to + 135ºC
Insert tightness IP 68
Insert material High-impact colourless PC
Compression resistance > 250 kN
Color of double sided reflector
  • white-white
  • white-red
  • yellow-yellow
  • white-orange
  • other colours on request
Color of one sided reflector
  • white, red
  • yellow
  • orange
  • other colours on request without certificate
Technical specification – Top and bottom cast iron cover
Shape Flat mushroom-shaped
Gross weight including electronic insert 4,5 kg
Height (above the road)  15 mm
Depth (under the road)  82 mm
Diameter (the part above the road) 180 mm
Diameter (the part under the road) 108 – 112 mm (cone)
Compression resistance >250 kN
Cast iron cover lifespan 10 years
Installation guidelines
Tools Milling machine with a special shaped cutter mounted on a trailer or small portable drilling equipment with a water pump
Higher slot diameter 182  (max.188 mm)
Lower slot diameter 116  (max.122 mm)
Higher slot depth 27 mm
Lower slot depth 85 mm
Installation in asphalt surface Bitumen adhesive in temp.160 – 180⁰C
Adhesive consumption Up to 0,55 kg
Installation in concrete road surface Epoxy or polyurethane adhesive (cold).
Insert and battery replacement On-site replacement by unscrewing the cover with a special key after releasing the locking
Pobierz dokumentację